diff --git a/pc/main.py b/pc/main.py
deleted file mode 100644
index 38689d2..0000000
--- a/pc/main.py
+++ /dev/null
@@ -1,105 +0,0 @@
-VERSION = "0.1.1"
-
-from ftplib import FTP
-from io import BytesIO
-from time import sleep, time
-
-launch_time = time()
-
-print("Starting PI-MC-WATCHER v" + VERSION + " for PC and Mac")
-print("Initializing...")
-
-# wehther or not to print the stats to the console
-print_stats = True
-
-# The credentials for the ftp server. These must be tweaked.
-hostname = "172.24.1.193"
-username = "testuser"
-password = "uwu"
-
-# defining the name of the file the stats are saved to
-filename = "output.txt"
-
-print("Connecting to FTP server...")
-
-ftp = FTP(hostname, username, password)
-ftp.encoding = "utf-8"
-
-print("Connected!")
-
-start_time = time()
-
-print("All setup!")
-
-# permits user to read console logs from above. Can be removed to accelerate start.
-sleep(3)
-
-while True:
-
-    with open(filename, "wb") as file:
-        # use FTP's RETR command to download the file
-        ftp.retrbinary(f"RETR {filename}", file.write)
-
-    file = open(filename, 'r')
-    content = file.read()
-    content = content.split(";")
-    # it is possible for the program to fetch the output text file right inbetween when the program on the Master PI cleared it and before it writes the stats.
-    # This sends an error message in the rare case of this occuring.
-    try:
-        fanmode = content[0]
-        slave_fanmode = content[1]
-        fanspeed = content[2]
-        fanspeed2 = content[3]
-        thermal = content[4]
-        slave_thermal = content[5]
-        cpu_usage = content[6]
-        cpu_freq = content[7]
-        cpu_up = content[8]
-        total_ram = content[9]
-        ram_usage = content[10]
-        ram_free = content[11]
-        ram_percent = content[12]
-        swap_percent = content[13]
-        disk_percent = content[14]
-
-        mc_motd = content[15]
-        mc_version = content[16]
-        mc_players_max = content[17]
-        mc_players_on = content[18]
-        mc_version_brand = content[19]
-        mc_plugins = content[20]
-        mc_playerlist = content[21]
-    except:
-        # The error message to display if the above explained happens
-        print("WARNING: Couldn't read the file's data. If this doesn't happen a lot, just ignore this warning.")
-
-
-    if print_stats:
-        print("---------- Uptime: " + str(cpu_up) + " ----------")
-        # loop_time and stop_time won't be available on the first run as they haven't been measured yet. Therefore this fallback is needed.
-        try:
-            print("Loop time:\t" + str(round(loop_time, 2)) + "\ts")
-            print("CMD Uptime:\t" + str(round(stop_time - launch_time, 2)) + "\ts")
-        except:
-            print("Loop time:\t--.--\ts")
-            print("CMD Uptime:\t--.--\ts")
-        print("CPU")
-        print("\tusage:\t" + str(cpu_usage) + "\t%")
-        print("\tfreq:\t" + str(cpu_freq) + "\tMHz")
-        print("\ttemp:\t" + str(thermal) + "\tC")
-        print("RAM")
-        print("\tusage:\t" + str(ram_percent) + "\t%")
-        print("\tswap :\t" + str(swap_percent) + "\t%")
-        print("Disks")
-        print("\tusage:\t" + str(disk_percent) + "\t%")
-        print("FANMODE")
-        print("\tmain:\t" + str(fanmode) + "\t%")
-        print("\tslave:\t" + str(slave_fanmode) + "\t%")
-        print("\tglobal:\t" + str(fanspeed) + "\t%")
-        print("\t2ndary:\t" + str(fanspeed2) + "\t%")
-
-    sleep(2)
-
-    stop_time = time()
-    loop_time = stop_time - start_time
-    start_time = time()
\ No newline at end of file
diff --git a/pi-master/main.py b/pi-master/main.py
deleted file mode 100644
index d3f12f3..0000000
--- a/pi-master/main.py
+++ /dev/null
@@ -1,283 +0,0 @@
-VERSION = "0.1.1"
-
-from http import server
-import RPi.GPIO as GPIO
-import subprocess, os, time, psutil
-
-launch_time = time.time()
-
-# Wether or not to print system essential stats into the console (This can have a small to medium performance impact.)
-print_stats = True
-# Wehter or not to ignore the slave PI. This can be useful if no second PI is connected.
-ignore_slave = True
-
-# Starting Messages
-print("Starting PI-MC-WATCHER v" + VERSION + " for RPi")
-print("Processing first loop. Each loop takes 5 seconds...")
-print("\n")
-if print_stats:
-    print("The system essential stats will be printed into the console. (This can be disabled at line 8 in the program file)")
-else:
-    print("The system essential stats will NOT be printed into the console. (This can be enabled at line 8 in the program file)")
-
-print("\n")
-
-if ignore_slave:
-    print("Slave will be ignored. (This can be configured at line 10 in the program file)")
-else:
-    print("Slave will NOT be ignored. (This can be configured at line 10 in the program file)")
-
-# Program Delay to allow reading the above printed messages
-time.sleep(5)
-print("\nStarting process MAIN")
-
-# GPIO setup
-GPIO.setmode(GPIO.BCM)
-GPIO.setwarnings(False)
-
-# Powering Status Pin to indicate that control program is up
-GPIO.setup(4, GPIO.OUT)
-GPIO.output(4, True)
-
-# setting up communication pins for binary fanmode transmission
-GPIO.setup(17, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
-GPIO.setup(18, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
-
-# setting up control pin for fancontrol
-GPIO.setup(4, GPIO.OUT)
-
-# setting up power pin for second fancontrol
-GPIO.setup(25, GPIO.OUT)
-
-# define default variables -> fan speed will be at max. if someting goes wrong with getting cpu temps
-global thermal, fanmode, slave_fanmode, slave_thermal, i, file, cpu_usage, cpu_freq, cpu_up, total_ram, ram_usage, ram_free, ram_percent, swap_percent, disk_percent, mc_motd, mc_version, mc_players_max, mc_players_on, mc_version_brand, mc_plugins, mc_player_list
-thermal = -99
-fanmode = 100
-i = 0
-
-file_path = "/home/testuser/output.txt"
-
-file = open(file_path, 'w')
-file.close()
-
-cpu_usage = 0
-cpu_freq = 0
-cpu_up = 0
-total_ram = 0
-ram_usage = 0
-ram_free = 0
-ram_percent = 0
-swap_percent = 0
-disk_percent = 0
-
-# check mc server status too. Set to False to disable Minecraft server module
-check_mcserver = True
-mc_ip = "127.0.0.1"
-mc_port = "25565"
-
-mc_motd = "-"
-mc_version = 0
-mc_players_max = 0
-mc_players_on = 0
-mc_version_brand = "-"
-mc_plugins = []
-mc_player_list = []
-
-# function to get cpu temperature on linux and macOS and decide on fan speed.
-def temp(thermal, fanmode):
-    thermal = int(round(float(subprocess.check_output("cat /sys/class/thermal/thermal_zone0/temp", shell=True).rstrip())/1000,2))
-    thermal = int(thermal)
-    if thermal <= 20:
-        fanmode = 0
-    elif 20 < thermal <= 35:
-        fanmode = 25
-    elif 35 < thermal <= 50:
-        fanmode = 50
-    elif 50 < thermal <= 65:
-        fanmode = 75
-    elif 65 < thermal:
-        fanmode = 100
-    return thermal, fanmode
-
-# function to round values
-def display(val):
-  return round(float(val),2)
-
-# function to get system informations
-def sys_monitor(cpu_usage, cpu_freq, cpu_up, total_ram, ram_usage, ram_free, ram_percent, swap_percent, disk_percent):
-    #cpu_usage = str(round(float(os.popen('''grep 'cpu ' /proc/stat | awk '{usage=($2+$4)*100/($2+$4+$5)} END {print usage }' ''').readline()),2))
-    cpu_usage = psutil.cpu_percent(interval=None)
-    cpu_freq = psutil.cpu_freq(percpu=False)
-    cpu_freq = cpu_freq.current
-    cpu_up = psutil.cpu_times()
-    cpu_up = cpu_up.user
-
-    ram = psutil.virtual_memory()
-    #total_ram = str(round(display(subprocess.check_output("free | awk 'FNR == 2 {print $2/1000000}'", shell=True))))
-    total_ram = ram.total
-    #ram_usage = int(subprocess.check_output("free | awk 'FNR == 2 {print $3/($3+$4)*100}'", shell=True))
-    ram_usage = ram.used
-    #ram_free = str(100 - display(ram_usage))
-    ram_free = ram.free
-    ram_percent = ram.percent
-
-    swap = psutil.swap_memory()
-    swap_percent = swap.percent
-
-    disk = psutil.disk_usage('/')
-    disk_percent = disk.percent
-
-
-    return cpu_usage, cpu_freq, cpu_up, total_ram, ram_usage, ram_free, ram_percent, swap_percent, disk_percent
-
-# function to get server status if enabled
-def mcserver(mc_motd, mc_version, mc_players_max, mc_players_on, mc_version_brand, mc_plugins, mc_player_list):
-    if check_mcserver:
-        # importing module mcstatus --> must be installed for this in order to work
-        from mcstatus import MinecraftServer
-        mcserver = MinecraftServer.lookup(mc_ip + ":" + mc_port)
-        try:
-            status = mcserver.status()
-            mc_motd = status.description
-            mc_version = status.version.name
-            mc_players_max = status.players.max
-            mc_players_on = status.players.online
-        except:
-            status = "offline"
-            mc_motd = "-"
-            mc_version = "-"
-            mc_players_max = "-"
-            mc_players_on = "-"
-
-        # IMPORTANT!
-        # for the following code to work, the query must be enabled in the server config file ('server.properties' --> 'enable-query=True'). 
-        # If you don't have access to that file but still want your server status, you can delete the following lines that contain the 'query' argument. 
-        # This will provide you with a more limited status: 
-        #   the version brand (vanilla, fabric modded, bukkit, etc.), the plugin list (if any) and the list if players won't be visible in that case
-        try:
-            query = mcserver.query()
-            mc_version = query.software.version
-            mc_version_brand = query.software.brand
-            mc_plugins = query.software.plugins
-            mc_player_list = query.players.names
-        except:
-            query = "unreachable"
-            mc_version = "-"
-            mc_version_brand = "-"
-            mc_plugins = "-"
-            mc_player_list = "-"
-
-        # if no query --> delete 'mc_version_brand', 'mc_plugins' and 'mc_player_list' from the return argument
-        # the line below should then look like THIS: return mc_motd, mc_version, mc_players_max, mc_players_on
-        return mc_motd, mc_version, mc_players_max, mc_players_on, mc_version_brand, mc_plugins, mc_player_list
-
-
-while True:
-    start_time = time.time()
-    # execute temperature function
-
-    thermal, fanmode = temp(thermal, fanmode)
-    # determine fanmode of 2nd raspberry PI and guess CPU temps
-    if GPIO.input(17) == GPIO.HIGH and GPIO.input(18)  == GPIO.HIGH:
-        slave_fanmode = 75
-        slave_thermal = "60 - 70"
-    elif GPIO.input(17) == GPIO.HIGH and not GPIO.input(18) == GPIO.HIGH:
-        slave_fanmode = 50
-        slave_thermal = "40 - 60"
-    elif not GPIO.input(17) == GPIO.HIGH and GPIO.input(18) == GPIO.HIGH:
-        slave_fanmode = 25
-        slave_thermal = "0 - 40"
-    elif not GPIO.input(17) == GPIO.HIGH and not GPIO.input(18) == GPIO.HIGH:
-        slave_fanmode = 100
-        slave_thermal = "70 - 100"
-    else:
-        slave_fanmode = 100
-        slave_thermal = "-"
-    
-    # get other system infos and Minecraft Server stats
-    cpu_usage, cpu_freq, cpu_up, total_ram, ram_usage, ram_free, ram_percent, swap_percent, disk_percent = sys_monitor(cpu_usage, cpu_freq, cpu_up, total_ram, ram_usage, ram_free, ram_percent, swap_percent, disk_percent)
-    mc_motd, mc_version, mc_players_max, mc_players_on, mc_version_brand, mc_plugins, mc_player_list = mcserver(mc_motd, mc_version, mc_players_max, mc_players_on, mc_version_brand, mc_plugins, mc_player_list)
-    
-    # determine the PI with higher CPU temperature
-    if ignore_slave:
-        fanspeed = fanmode
-    else:
-        if slave_fanmode > fanmode:
-            fanspeed = slave_fanmode
-        else:
-            fanspeed = fanmode
-    
-    if fanmode < 50:
-        fanspeed2 = 0
-        GPIO.output(25, False)
-    elif fanmode >= 50:
-        fanspeed2 = 100
-        GPIO.output(25, True)
-    elif thermal >= 85:
-        os.system("sudo poweroff")
-
-    i = 0
-    
-
-    if fanmode == 100:
-        GPIO.output(4, True)
-        time.sleep(2)
-    elif fanmode == 75:
-        while i < 6:
-            GPIO.output(4, True)
-            time.sleep(0.3)
-            GPIO.output(4, False)
-            time.sleep(0.1)
-            i = i + 1
-    elif fanmode == 50:
-        while i < 6:
-            GPIO.output(4, True)
-            time.sleep(0.2)
-            GPIO.output(4, False)
-            time.sleep(0.2)
-            i = i + 1
-    elif fanmode == 25:
-        while i < 6:
-            GPIO.output(4, True)
-            time.sleep(0.1)
-            GPIO.output(4, False)
-            time.sleep(0.3)
-            i = i + 1
-    else:
-        GPIO.output(4, True)
-        time.sleep(2)
-
-    # write all data to list
-    system_infos = [fanmode, slave_fanmode, fanspeed, fanspeed2, thermal, slave_thermal, cpu_usage, cpu_freq, cpu_up, total_ram, ram_usage, ram_free, ram_percent, swap_percent, disk_percent, mc_motd, mc_version, mc_players_max, mc_players_on, mc_version_brand, mc_plugins, mc_player_list]
-
-    # delete all text in file and write list to file
-    file = open(file_path, 'r+')
-    file.truncate(0)
-    file.close()
-    file = open(file_path, 'w')
-    for e in system_infos:
-        file.write(str(e))
-        file.write(";")
-    file.close()
-
-    stop_time = time.time()
-
-    if print_stats:
-        print("---------- Uptime: " + str(cpu_up) + " ----------")
-        print("Loop time:\t" + str(round(stop_time - start_time, 2)) + "\ts")
-        print("CMD Uptime:\t" + str(round(stop_time - launch_time, 2)) + "\ts")
-        print("CPU")
-        print("\tusage:\t" + str(cpu_usage) + "\t%")
-        print("\tfreq:\t" + str(cpu_freq) + "\tMHz")
-        print("\ttemp:\t" + str(thermal) + "\tC")
-        print("RAM")
-        print("\tusage:\t" + str(ram_percent) + "\t%")
-        print("\tswap :\t" + str(swap_percent) + "\t%")
-        print("Disks")
-        print("\tusage:\t" + str(disk_percent) + "\t%")
-        print("FANMODE")
-        print("\tmain:\t" + str(fanmode) + "\t%")
-        print("\tslave:\t" + str(slave_fanmode) + "\t%")
-        print("\tglobal:\t" + str(fanspeed) + "\t%")
-        print("\t2ndary:\t" + str(fanspeed2) + "\t%")
-    
\ No newline at end of file
diff --git a/pi-slave/main.py b/pi-slave/main.py
deleted file mode 100644
index 0532fed..0000000
--- a/pi-slave/main.py
+++ /dev/null
@@ -1,57 +0,0 @@
-import RPi.GPIO as GPIO
-import subprocess
-import time
-
-# GPIO setup
-GPIO.setmode(GPIO.BCM)
-GPIO.setwarnings(False)
-
-# Powering Status Pin to indicate that control program is up
-GPIO.setup(4, GPIO.OUT)
-GPIO.output(4, True)
-
-# setting up communication pins for binary fanmode transmission
-GPIO.setup(17, GPIO.OUT)
-GPIO.setup(18, GPIO.OUT)
-
-# define default variables -> fan speed will be at max. if someting goes wrong with getting cpu temps
-thermal = -99
-fanmode = 100
-i = 0
-
-# function to get cpu temperature on linux and macOS and decide on fan speed.
-def temp(thermal, fanmode):
-    thermal = int(round(float(subprocess.check_output("cat /sys/class/thermal/thermal_zone0/temp", shell=True).rstrip())/1000,2))
-    if thermal <= 20:
-        fanmode = 0
-    elif 20 < thermal <= 40:
-        fanmode = 25
-    elif 40 < thermal <= 60:
-        fanmode = 50
-    elif 60 < fanmode <= 70:
-        fanmode = 75
-    elif 70 < fanmode:
-        fanmode = 100
-    return thermal, fanmode
-
-# main loop
-while True:
-    # get cpu temp
-    thermal, fanmode = temp(thermal, fanmode)
-    if fanmode == 0 or fanmode == 25:
-        GPIO.output(17, False)
-        GPIO.output(18, True)
-    elif fanmode == 50:
-        GPIO.output(17, True)
-        GPIO.output(18, False)
-    elif fanmode == 75:
-        GPIO.output(17, True)
-        GPIO.output(18, True)
-    else:
-        GPIO.output(17, False)
-        GPIO.output(18, False)
-    # cpu temp will be updated every 5 seconds
-    time.sleep(5)
-    i += 1
-    # log cpu temp and fan speed
-    print("----- Run Nr.:", i, "\nCpu temperature measured: ", str(thermal) + "°C", "- Fanspeed: ", str(fanmode) + "%")
\ No newline at end of file
diff --git a/src/circuit.png b/src/circuit.png
deleted file mode 100644
index 09dff32..0000000
Binary files a/src/circuit.png and /dev/null differ